Instruction To Use:

Surface Preparation:

• Prior to application, ensure the target surface is meticulously cleaned and devoid of any contaminants such as dirt, oil, dust, or moisture. Contaminants can compromise the adhesive bond strength.
• Utilize a suitable cleaning solvent recommended by the manufacturer to remove any surface contaminants.
• Visually inspect the surface for cracks, pinholes, or other defects that might impact adhesion. Address any such defects with appropriate repair methods before proceeding.
• Allow the surface to completely dry before epoxy application.

Epoxy Mixing

• Precisely measure Component A (Resin) and Component B (Hardener) according to the specified weight ratio of 100 parts Resin to 50 parts Hardeners. Utilize a calibrated scale to ensure accurate measurements.
• Employ a thorough mixing technique for a minimum of [Manufacturer's recommended mixing time] to achieve a uniform and homogeneous blend throughout the entire mixture. This ensures proper activation of the curing process.
• Employ a thorough mixing technique for a minimum of [Manufacturer's recommended mixing time] to achieve a uniform and homogeneous blend throughout the entire mixture. This ensures proper activation of the curing process.

Application

• Select an appropriate application tool based on the surface area and desired epoxy layer thickness. Common tools include squeegees, trowels, or rollers.
• Apply the mixed epoxy promptly onto the prepared surface, ensuring complete coverage of the desired area.
• For optimal results when filling cracks or pinholes, utilize a pointed tool (e.g., syringe or craft stick) to ensure the epoxy penetrates these defects thoroughly.

Curing

• Allow the applied epoxy to cure undisturbed for a minimum of 24 hours at the recommended ambient temperature (as specified by the manufacturer). During this time, the epoxy will undergo a chemical reaction to achieve its full strength and desired properties.

Additional Considerations:

• Refer to the manufacturer's safety data sheet (SDS) for proper handling and disposal procedures for the epoxy and its components.
• Wear appropriate personal protective equipment (PPE) such as gloves, safety glasses, and respiratory protection (if recommended) while handling the epoxy.
• Work in a well-ventilated area to minimize exposure to epoxy fumes.

Sizes:

• CONTAINER SIZE: 1 KG EACH OF 2 parts RESIN AND 1 KG OF CATALYST 

Area Of Use:

• Marble and Granite Slab

Color:  Water Clear.