Instruction To Use:

How to Use:

• Surface Cleaning: Ensure the surface is completely clean and free of dirt, dust, oil, grease, or any other contaminants. Utilize appropriate cleaning solutions based on the surface material. Allow the surface to dry thoroughly before proceeding.
• Undiluted Product Application: Apply the product directly onto the clean and dry surface. Use a clean, lint-free applicator appropriate for the product and surface type (e.g., microfiber cloth, applicator pad). For optimal results, apply a thin, even coat following the manufacturer's recommended coverage rate.

Preparation Time

• Allow the product sufficient time to penetrate the surface according to the manufacturer's instructions. Penetration time can vary depending on the product, surface material, and porosity.

Multiple Applications (Porous Surfaces):

• For highly porous materials, a single application may not be sufficient. In such cases, reapply the product one or two times more, allowing the previous coat to dry completely between applications. This ensures adequate saturation and optimal performance.

Excess Product Removal:

• It is crucial to prevent excess product from drying on the surface, especially on polished finishes. Dried excess can cause streaking and clouding, detracting from the final appearance.
• Immediate Removal: While the product is still wet, promptly remove any excess using a clean, damp rag with WET NATURA solution.
• Alternative Methods: For stubborn excess or on surfaces not compatible with WET NATURA , utilize the manufacturer's recommended REMOVER or a buffing machine equipped with a soft pad. Buffing gently will remove excess product without damaging the surface.

Porous Surface Re-application:  On porous surfaces, a second application may be necessary after the first coat has completely dried. Follow the same application and removal procedures as outlined above.